|
|
JIM C,,GASGAS Question
|
Jim i`m looking for longer pull rods for the link system to my girlfriends
GG EC 200 -06, i live in Sweden and the aftermarket parts for GG is not that
big over here, ZERO aftermarket parts..........
products, then chassis/suspension on the bike picture u see the 126mm push
rod that they make, well the problem is that it`s only up too -03 models and
nothing after that. Is this place open or shut down?
Do you now were i can get these 126mm pull rods elsewhere??
Also looking for a pipe guard for the stock exhaust pipe, preferer if it`s
made of carbon fiber/kevlar like the one LT-racing have for the Doma pipe
ocn the website........
Please help, we live in the worst country of all when it comes to bike
parts.
|
Try this GasGas forum for more answers:
|
|
Roger,
Your bike uses the same pull rods (122mm from the factory) as do all
the GasGas models from 2000. (The '97-'99 models used 123mm pull
rods.) The 124 mm & the 126 mm LTR pull rods will work fine on your
bike, although it may make your spring a bit weak for your weight, as
they give the bike more leverage on the shock. It depends on how close
your springs are matched to your weight.
I don't have any of the longer LTR pull rods left.
Les Tinius (LTRacing) still sells the longer pull rods, both 124mm
and 126mm. He also ships to Sweden. His shipping is very reasonable.
|
Well the bike is for my girlfriend, she is 158 cm tall and her weight is
about 50 KG and the orginal spring is made for 65-70 KG on the bike so we
still might have to change the the spring for her anyway.
|
Send him an order by e-mail, fax, or phone.
Tell him that Jim Cook sent you.
Les also produces a larger volume left powervalve cover, that will
enhance your 200's low end power.
|
Thank you, i will send him an e-mail right away.
|
Good Riding to you!
Wudsracer/Jim Cook
Smackover Racing
'06 Gas Gas DE300
'82 Husqvarna XC250
Team LAGNAF
|
|
|