Home
Classic
Harley
Yamaha
Suzuki
Ducati
Triumph
Honda
Kawasaki
Aprilia
Moto Guzzi
BMW
Buell
Morini
Royal Enfield
Racing
Tarmac
Track
Motocross
Trials
Mechanics
Chain
Oil
Battery
Tank
Carb
Horn
Lights
Brakes
Clutch
Cylinder
Gears
Wheels
Tyres
Chassis
Exhaust
Suspension
Misc

HEY!!! On topic post!! Power-valve question.



I'm thinking that my GasGas 125's powervalve might be a little
sticky. I also remember GG having a problem with valves that are
installed upsidedown. If I pull of the cover off, what should I look
for, and where should I shoot a spray of PB Blaster?

Thanks - JayC
Not the powervalves, but the powervalve cover. I don't think you can
install the 125cc pv upside down.
One way (upside down), the bolt that goes through the cover will
impede the powervalve's action. (Think of it as a governor, there to
let the kid get used to the bike before getting to play with all the
available power. That's what the GasGas tech man told me.)
The other way (right side up), and the bolt stays out of the way.

Spray down everything that is dark and discolored with carbonized
fossil fuels. and make sure that the powervalve works freely (with the
link disconnected) before you finish.

Still need some jets? Dudley didn't get them all.
Uh! I had moeny left... didn't know you had anymore... :)


Wudsracer/Jim Cook
Smackover Racing
'06 Gas Gas DE300
'82 Husqvarna XC250
Team LAGNAF