|
|
1995 GSX-R 750 rebuild options??
|
Hey guys I have a 1995 GSX-R 750 and to my dismay, the timing chain
came loose during a ride. One of the exhaust valves was pushed through
the piston in the third cylinder, and nearly all of the tappets topping
the exhaust valves are cracked and scattered about the top end. I guess
my question is how much do I need to replace? Should I simply buy new
exhaust valve assemblies and a new piston? Should I replace the entire
top end? The cam shafts appear to be solid and straight, could I get
by with just replacing the valve assemblies? And as for the bottom
end, could I replace the piston and rings on the third cylinder without
having to rebuild all four cylinders? I am new to this so any advice
would be appreciated - Thanks
|
Your going to quickly find when you start calling around to bike
wrecking yards that you can get a running engine for that bike for
probably a lot less than it would cost in parts to rebuild what you
have.
Get yourself a used engine, and when that engine dies, you can
take both engines and probably mix and match parts between them
to get a running engine.
|
*Ding* for the most sensible posting of the week so far.
|
|
|
|